4 Major Construction Technologies To Watch For Construction Site Safety

We are living in the future, and even the construction industry is slowly adapting to the change brought by this. New technologies are presenting ways that allow manufacturers to ensure safety while being able to improve efficiency at the same time.

Here are the major construction technologies to watch out for in the construction industry.

1. Building Sensors

With the help of building sensors, avoiding costly losses becomes possible. The reason behind this is the fact that there’s a wide range of industrial sensors available in the market, specifically the environmental sensors that are focused on tracking water, temperature, and moisture.

To support that, experts claim that for the past few years, projects in different areas, especially the ones in very hot or very cold areas that are almost complete, but the pipe burst, have experienced massive problems, and it took more time to complete the project, and of course, it’s also a waste of investment. With building sensors, monitoring temperature fluctuations become possible.

Likewise, if there’s a presence of moisture, this can easily be detected, and those who are in charge would be alerted right away.

The beautiful thing about this technological innovation is that it’s not even expensive at all. It’s a great value that would help you avoid massive losses. These building sensors can also be connected to wearables, such as smart hats, reflective vests, intelligent goggles, and so on.

2. Radio Frequency Identification

One of the most common challenges construction workers have to face on the job site is that they are prone to accident due to inefficiency. This holds accurate especially on more significant sites in congested city areas– it can be very challenging to get workers on the lifts to get them up on the floors they are supposed to work on. It can take as much as 45 minutes to get some of the workers to the top floor of a building.

With the help of RFID, contractors and project managers can now map worker movement, monitor where people are working, and the duration of time. This allows them to plan efficiently and ensure that there won’t be time wasted getting from one area to the next. Creating ways to transport workers around the job site has become more convenient.

3. Virtual Reality

With virtual reality training modules, workers get a better idea of the hazardous conditions they are bound to face while on the job site. The good thing about this is that there’s no need to risk their lives anymore, and trainees can now practice walking and performing tasks, without having to be in the exact place/location that is deemed to be dangerous.

Hopefully, a few years from now, this can be a substitute for the real thing, and there won’t be a need to risk the workers’ live anymore.

Virtual reality aims to create a realistic scenario that would allow workers to train in a completely safe environment.

4. 3D Laser Scanning

If you’re familiar with “LIDAR,” then you probably know what 3D laser scanning is. This technology uses millions of beams of light to create 3D blueprints of a finished room while being able to measure the distances down to the millimeter as well.

This can be very helpful for contractors as it allows them to compare measurements of the project to the original design, and be able to determine if they could build the project, just exactly like what was intended.

As we embrace technology, especially in the construction industry, we can clearly say that contractors would be able to leverage in some ways and …

How Artificial Intelligence Will Advance the Construction Industry

The concept of Artificial Intelligence used to be just part of the “futuristic” plan, but as technology continues to develop, we have finally reached the point where AI is becoming one of the most important technological innovations that could help us advance even more.

In the construction industry, with the help of Artificial Intelligence, job sites become more secure and efficient.

That said, allow us to discuss further how artificial intelligence will continue to affect the job site positively.

The State of AI in Engineering and Construction

Although the construction industry is gradually embracing technology, the use of AI within the job site is quite rare. However, there are plenty of startups that are slowly gaining market traction and attention for their AI-focused strategies. Here are some of the few examples of that:

With the help of artificial intelligence, it has become possible for project schedule optimizers to evaluate millions of alternatives for project delivery, allowing them to continually improve their overall project planning, without risking any of their investments.

Additionally, enhanced analytics platforms can collect and analyze data sensors to understand patterns and signals that would allow them to come up with real-time solutions, secure the area, cut down costs, and be prepared for unplanned downtime.

Indeed, the construction industry could enjoy long-term benefits as it utilizes additional AI and machine learning technologies to complete a project. Even the New York Times has told the public that technology, like smart traffic cones, are making the lives of individuals and professionals more efficient, and the construction industry is one of the few sectors to enjoy this change.

The Design and Planning Phase Becomes More Efficient and Accurate

In a construction project, the design and planning phase is one of the most critical steps in a construction process. However, the problem with this is that it can be quite time-consuming as it requires months, sometimes even years, of preparation.

Meticulous attention to detail, as well as training of the entire team of engineers, architects, and construction professionals,  are also necessary. Artificial Intelligence, together with machine learning technology, could help in improving the entire process. This would result in a more accurate, verified, and well-designed plan.

Aside from that, the advancements brought by AI could also help project managers and architectural consultants in forecasting and scheduling without the need to sacrifice a lot of time, because everything would be handled by AI technology.

Research and trials can also be conducted quickly, allowing them to further leverage the project. For project and site safety, AI could improve the capabilities of the heavy-duty machine, just like in site surveying, which would ensure the safety of the workers.

As the construction industry continues to move forward to increase on-site productivity and safety, there’s no doubt that more construction companies would turn toward AI and machine learning applications to get the job done efficiently.

The wonderful thing about these tools is that they offer short-term and long-term benefits for everyone to enjoy– not only the company, but the workers, and projects as well. Real-time data and asset monitoring are a great way to get real-time updates regarding the project and perform modifications whenever necessary.

AI-assisted design and planning, as well as predictive maintenance for construction fleets and equipment, are just some of the applications that utilize AI.

These practical applications are also now being utilized by construction firms across various projects and applications. As they continue to take steps toward modernization, the more that we can expect that the construction world would greatly benefit from AI in the long run.

What the Future Holds

Road Work Safety Considerations for Construction Crews

Those who are on the construction site are always putting their lives at risk. Aside from the daily threats of oncoming traffic; the stress and verbal abuse they get from enraged motorists are no joke. These are just some of the things they cannot entirely avoid, however, as we talk about safety, it’s something they can learn to guarantee that none of these workers would get involved in any serious accidents in the future.

Aside from the dangerous machinery they often deal with, road safety workers are also prone to hearing problems, heat stress, and sometimes, even respiratory diseases. Working on a construction site is not an easy task- they have to endure the noise brought by roaring equipment and other external factors.

The good thing is, there are a lot of safety considerations that would protect the workers and the public. These include the use of “modern flagging operations,” such as median barriers, concrete, traffic cones, delineators, and other traffic equipment that would efficiently separate traffic from the work zone. Reflective sheeting is also known for being efficient when it comes to notifying motorists regarding road conditions and emergencies.

The security and safety of the workers can be guaranteed by following these guidelines:

Encouraging the Workers to Wear Proper Attire When Working

Construction workers should be required to wear the proper gear, especially when they have to work on the road, outside the building. Wearing a safety hat, sunscreen, and long-sleeved shirt to protect the workers from overheating, sunburn, and dehydration should be highly implemented.

The Workers Should be 100% Prepared

It’s also essential for managers to have the assurance that new workers are 100% prepared for all types of work, especially the massive traffic they are going to undertake. That means they should be comfortable and aware of how to utilize traffic signals for drivers and warn them regarding the work site in progress. Best of all, they should have enough road awareness never to ignore oncoming traffic as this can be a significant cause of the accident if left unattended.

New Employees Should Also Be Trained

To prevent accidents, it’s essential to train new workers on how to use heavy equipment and how to safeguard them for optimal security. The use of protective equipment, as well as personal protective gear, could also be helpful for this.

Aside from that, noise levels should also be carefully evaluated on a regular basis. Some of the most common accidents that happen to construction workers is hearing loss. That’s why experts suggest the use of earmuffs or earplugs that could shield the worker’s ear drums, especially from high decibels.

Proper Training on How to Handle Road Work Tasks

Workers should also to undergo appropriate training on how to install the signs and barriers on road work zones. This isn’t something that they can quickly get out to the public by yelling “slow down” while holding a red flag.

Instead, there’s a proper way on how to instruct these cars to slow down, and it’s probably the best to set up road work zones. Moreover, workers should always be reminded why they have to stay vigilant and alert at all times.

Properly Control Traffic

In a work zone, there should be a warning area consisting of warning signs that alert drivers about the upcoming changes in driving conditions. Likewise, there should also be a transition area wherein traffic control devices can be utilized for lane closures, as well as traffic pattern shifts. A termination area that would direct traffic so that it can resume back to normal would also …

Advertising Bombing

In now days we are always in lack of materials. We find another key component of television, present everywhere and everywhere. These are the ads that accompany all the programs. The purpose of the show is to keep the world stuck on the screen as long as it takes to make it see the ads. The purpose of the ads is to capture the attention of viewers as long as they need to earn money.

This article is provide by Mediagroupww.com

How much does advertising impact on our everyday life?

An important issue that concerns television is that it makes us forget the many problems that exist in today’s society. Advertising is a proof of this problem. Of course, advertising was not invented by television; it was probably born at the same time as trade. However, the media, thanks to its excellent persuasion and penetration in all venues, has greatly enhanced the effectiveness of advertising.

Of course, transmitting objective information about a product to make it more widely known and exploitable is not bad. On the contrary, it is a beneficial service to the buyer as well as a fundamental term of trade. The problem stems from the fact that advertising actually deviates significantly from these purposes and, using all the psychological mechanisms of concealed persuasion, is transformed into a continuous bombardment of images and slogans in order not to inform the world but to push it with sneaky way of consumption.

In addition, advertisements have an immediate economic impact on the market because, as a result, the prices of advertised products are disproportionately higher than those of non-advertised products, and very often regardless of their quality.

For this reason, it is clearly wrong to claim that private channels, which are not supported by the public contribution paid by citizens for public television, offer free of charge their programs. Why, in fact, we pay a percentage of this levy whenever we buy a product advertised on private channels, as the cost of advertising costs the final price of the product. Places where viewers can not accurately calculate the amount of contribution they pay in this indirect way to private television stations each year.

Advertising serves the consumer society because it activates the following vicious circle: greater consumption – greater production – even greater consumption.

Advertisements mainly hit the population groups with the lowest cultural background: the lower a person’s cultural level, the more often he sees television, and thus the impact of advertising is more. Additionally, advertising is based on the distortion of reality, as it shows something and sells something else that has not even an external link with the advertised product. By following the recipe of the glowing body, the advertisements promise masculinity, beauty, charm, youth, and success while actually selling soaps for bathing or anything else.

Where is the strength of advertising?

Advertising is created with the help of specialists and psychologists who are deeply aware of the persuasion strategy. Here are some of the simplest psychological mechanisms that advertising uses:

– Generalization. According to this mechanism, advertising expands arbitrarily the positive or pleasant aspects of an asset that one has in his personality. If, for example, I admire Ronaldo’s football capabilities, I automatically appreciate the yogurt advertised by this player. It is clear, of course, that there is no logical link between football skills and knowledge about dairy products.

– The credibility of the source. The ease with which we accept advice is proportional to the credibility or prestige of the one who gives it. For this reason, advertisements use people who enjoy a general appreciation …

The Best Futuristic PPE Technology to Look for in 2018

For the past few years, the use of PPE in the construction industry has been on the rise, especially with the recent innovations in technology. Despite that, there’s still a good number which hasn’t discovered how beneficial smart PPE can be.

The Importance of Wearing PPE in the Construction Industry

One of the few reasons why workers don’t entertain the idea of wearing PPE is because they find it uncomfortable and it restrains them from performing their tasks quickly and efficiently.

What they fail to realize that even though PPE is considered as the last line of defense, it’s still imperative to ensure a worker’s safety. It can save thousands of lives.

More specially, by wearing smart PPE wearables, such as safety vests, hard hats, goggles, and the like, you can enjoy the following:

  • Avoid constant exposure to health hazards, such as radiation, chemicals, and heat.
  • Lessen the risk of hearing or vision loss, burns, abrasions, chronic diseases, dismemberment, and lifelong disabilities.
  • Reduce the severity of the injury in case a worker gets involved in one.
  • Improve personal protection.

However, to thoroughly enjoy these benefits, it’s essential that you know how to use them correctly, and be able to maintain them properly. It’s crucial that the contractors, supervisors, and workers are familiar with the different types of PPE to determine the best ones for their needs.

Other Benefits Of PPE

Reduces the Risks of Injuries and Sickness

Smart PPE reduces the harmful effects of injury, and it’s also capable of preventing accidents from happening in the first place. As you lower these risks, you’d also increase the productivity and efficiency of the construction site.

A Professional Way to Fulfill Legal Health and Safety Obligations

With the use of smart PPE on the construction site, you’ll be able to avoid accidents, prosecutions, and investigations.

Eliminate HSE Investigations

With smart PPE, you’ll stay compliant and be able to avoid prosecutions, legal fees, fines, and compensation payouts as you’ll have the assurance that you are adhering with the safety codes set by the state.

Look After Your Workers Efficiently

To ensure overall productivity within the construction site, you have to make sure that the workers are safe and happy. Through this, you’ll be able to reduce the risks of absences, improve turnover time, and best of all, enjoy a higher staff morale.

Cost Saving Solution

The money you are going to invest in PPE would be covered by savings that you’ll gain from other benefits, such as reduction in sickness absence, lower staff turnover, and avoid costs that you’d have to settle in case you get involved in work-related accidents.

Addressing Potential Workplace Hazards

Each business is different, and in the construction industry, there’s a unique range of issues construction workers have to face. With the use of PPE, you’ll be able to address the needs of employees according to on the possibility of exposure to sources of contamination and injury– whether it’s loud sounds, heavy objects, corrosive substances, and the like.

To support that, according to the National Institute of Occupational Safety, more than 2,000 workers across the US had to deal with injuries on a regular basis. Around 600 of these workers need to undergo treatment in the emergency room.

Additionally, approximately 70% of employees who suffered from hand injuries were the ones who are not wearing gloves while doing their tasks. Then, the other 30% of these suffered from injuries because of mishandling of machinery.

With the use of smart PPE, together with proper training, it’s possible to ensure the safety of employees, which would significantly reduce the risks …

How Event Organizers Benefit From Trade Show Internet Wi-Fi Solutions

There are many reasons why event organizers consult Trade Show Internet on issues regarding internet solutions for both outdoor and indoor events. You can now get event Wi-Fi solution for every event from Trade Show Internet. This is possible regardless of whether the event you are holding is small or big. Mostly, for small events, most event organizers prefer the rental hotspots. For big events, the onsite team is deployed to offer high-density Wi-Fi, captive portals and splash pages as well.

Well, most event organizers also take advantage of large events to engage attendees even more. Through Trade Show Internet Wi-Fi captive portal solution, event organizers can easily collect attendees’ data and also interact with them through social media.  Companies that have benefitted previously from Trade Show Internet include; Comcast Xfinity, HBO, Mazda and Bosch among others.

Event organizers can easily access Trade Show Internet services. If you value flawless internet connectivity, then you must seek for such services from reliable internet service providers. For any event that you are organizing, such as corporate events, trade shows, exhibitions, and festivals, you can get the right internet connectivity solution from Trade Show internet. In fact, for a festival or any other event to be successful, you must ensure that the best internet solutions are deployed. Find tips on the festival internet or any other event internet solutions for any event from Trade Show Internet.

 …

Advantages of using a page vs. a Facebook profile

There is something that personally annoys me when I click on the Facebook link for a new brand / venture and I see that it is a profile instead of a fan page. Why does it bother me so much? Here I detail a number of benefits of having a fan page. But actually, if you have a facebook account, you must need more “likes” in your facebook’s post if you want to be famous, and don’t worry, because now you can Buy facebook post likes everywhere.

All the energy and dedication you put into creating this new venture, loses points and professionalism when you get to your Facebook page and you must request your friendship to see their news. Immediately I think that brand is amateur. Not only facebook post like that you need, you have to also Buy Facebook video views to increase your views result in your Facebook’s video.

We do not want to be friends of brands, we simply want to follow your news and keep up to date with your news.

We do not want to share our photos or personal stories.

If I am a new entrepreneur what suits me?

A page is ideal to represent a brand or venture on Facebook. Why? Here are the 11 main advantages:

The number of friends in a profile is limited, but a fan page, you can have “like” unlimited.

Fan pages are indexed, which means that some content you publish there will also. As an entrepreneur, you will want to appear in the search engines.

In a Fan Page, your fans will be able to tag you, however if you have a profile, only friends can do it. You will definitely want to have the option of your fans tagging you, since more people will know you.

Fan Page includes statistics. You can analyze the scope of a publication, which will allow you to analyze if your message is well focused on your audience, among other things. These are some of the statistics that show a Fan Page, you would be missing out if you used a personal profile for your brand.

Facebook Stats

It is very common to see competitions on Facebook. You will not be able to do it if you have a personal profile since the function is not available. The contests generate the much-desired celebrity engagement, which in turn has a viral effect, as fans will share the information. Equal, be careful with this tool … it will be imperative to know our objectives when making the contest. Do you want to promote a new product?

Do you want to grow your “I like”?

In a Fan Page, you have the possibility to generate advertisements and / or promote your site. Another important option that you would be missing if you used a personal profile.

Facebook-advertising

In a Fan Page, you can choose the number of people who will have access to your Fan Page, avoiding giving the password to several people. Not only will you give access to your Fan Page, but through the option of managing administrators, you can grant different permissions for each person, whether administrator, content creator, moderator, advertiser or statistics analyst. Here you will be able to the different profiles and permissions that you can assign to the administrators.

By having a Fan Page, you give your fans the ability to check in on where they are. As long as your business / brand has a physical place. You will always want your fans to interact with your brand.

By having a Fan Page, you can show …